Hatchery Equipment

Complementation for your hatchery

Automatic Euthanasia Devices

Presently, day-old chicks are used world-wide as a source of food for birds of prey, snakes and other predatory animals. Chicks offer vital nutrients and vitamins and ensure close-to-nature and species appropriate feeding. Many animal parks use these animals because they represent an important nutrient with low fat and rich in proteins and vitamins. It's possible to use them as fodder for birds of prey, snakes, lizards and other pets. Respect for animal welfare is extremely important if the poultry-industry wants to show its respect for public opinion. When killing animals is part of the process, consumers expect it to be done in the best possible way, without unnecessary suffering, pain or stress. The AED-line has proven that its machines are capable of killing male, sick or deformed day-old chicks and similar animals in the most animal-friendly way possible. The AED-line is the first machine series to work completely according to the European rules for animal killing.

The chicks first get numbed before they’re killed, without any pain or unnecessary stress. This method of killing is proven to be the most animal-friendly way of killing one-day chicks. Tests in laboratories show that there is no chemical reaction taking place in the brains of the killed animals. This means no stress hormones are produced during the anesthetic phase. These hormones are indicated, when the one-day chicks are killed the customary way: by slowly delivering CO2 gas and killing the animals through suffocation. With the AED-line, the animals are put in a space filled with at least 80% CO2- or Argon gas, which brings them into a numbing stage, immediately followed by death. The machines are built to inevitably kill all animals in the process; there is no possibility for animals escaping or entering once the process is started.

AED-6 Automatic Euthanasia Device

The AED-6™ is the smallest machine in the AED-6™ to AED-40™ series. This machine has a stainless steel frame, permanently attached to which is a control box and an analyzer. The CO2 or Argon percentage can be read off from the side of the machine and is automatically maintained at the correct level. The machine also has a plug and socket connection that can be used in emergencies to automatically close the machine's main supply valve. The door on the front of the machine is opened using a rotary knob, enabling the user to gain access to the loading opening. Behind the door is a lift with conveyor rollers, used to roll crates or boxes into the machine. By closing the door, a closed container is created, and, after pushing the cycle start button, the lift descends and the animals are fed into a chamber filled with CO2 gas. The lift stops in the lowest position, where it will remain for the duration of the processing time programmed until the animals have been killed. Afterward, the lift returns to the start position. It is now safe to open the door again. The machine is emptied and reloaded, after which the cycle button can be pressed again. After use, the machine is simple to clean. The panels are removed using simple turning locks. After removal, every corner of the machine can be thoroughly hosed down. The water used drains away automatically through the waste water discharge.


  •  Capacity: 1 or more boxes or crates, depending on the dimensions day-old chicks 5000 per hour
  • Cycle time: 3 - > minutes, depending on the animals to be killed
  • Application: small numbers of animals to be killed
  • Users: medium-sized hatcheries, laboratories, vermin control, culling of sick or infected animals
  • Contents: length x width x depth: 1000 x 914 x 600 mm
  • Dimensions: machine length x width x height: 1200 x 1453 x 1865 mm
  • Work area: 5.2 m²
  • Weight: 860 kg
  • Connection: 380V 3 phase + 0 + earth C-form 16A 5 Pin
  • Gas: C02 or Argon
  • Consumption: at 12 cycles per hour, approx. 37.5 kg per 10 hours
  • Time adjustment: adjustable from 10 sec. - 10 hours
  • Material: stainless steel AISI 304
  • Finish: ground plating P240, frame blasted
  • Safety: external gas valve protection, plug, and socket connection
  • CE: approved in accordance with 89/392CEE. Modifications have been produced in accordance with Directives 91/368CEE, 93/44/CEE, low voltage 73/23EEC

Options: a model using Argon gas control panel rotation, capacity expansion to 40,000 chicks

AED-10 Automatic Euthanasia Device

The AED-10™ is produced entirely from stainless steel AISI 304, while its frame is blasted. The machine's cover panels are made from ground plating P240. An input opening can be found at the top left-hand side of the machine, with a corresponding output opening on the right-hand side. Chicks can be fed in by hand, but also automatically, which is better for the machine as they are then fed at regular intervals through the machine. A variable passageway has been created on the input side of the machine. This ensures that chicks are fed through at regular intervals, as described above. Chicks are fed onto a conveyor belt system. Here, they die within 3 seconds, after which they are fed to the bottom of the machine and leave the machine on the right-hand side, after approx. 4 minutes. The statutory processing time is a minimum of 3 minutes. Therefore, our machines respect this statutory requirement. Due to years of research and the construction of several machines, the user-friendliness of the AED-10™ is optimal. For example, it is easy to clean the machine by removing its cover panels, giving access to parts inside the machine and making it possible to properly hose down every area of it. In addition, where necessary, the entire conveyor system can be taken apart within just 30 minutes, so that the machine is completely empty and can be cleaned thoroughly, for example in the case of a bacterial disease.


  • System: non-stop, using conveyor belts
  • Capacity: 15,000 - 18,000 day-old chicks per hour
  • Cycle time: 3 - 4 minutes
  • Application: large numbers of day-old chicks
  • Dimensions: length x width x height: 3345 x 1045 x 1975 mm
  • Input: 320 x 750 mm
  • Work area: 6.50 m² / Weight: 1250.00 kg
  • Connection: 380V 3 phase + 0 + earth C-form 16A 5 Pin
  • Gas: CO2 or Argon
  • Consumption: approx. 37.5 kg per 6 hours
  • Time adjustment: adjustable from 8 - 3 min.
  • Material: stainless steel AISI 304

Options: model using Argon gas control panel rotation, capacity expansion to 40,000 chicks

Movexx

Up until now, it was no easy job moving Petersime setter trolleys.
Fortunately, that has changed with the arrival of the Movexx T1000, a compact and ultra user-friendly push/pull assistant, especially for Petersime setter trolleys 168/192. The T1000 moves roll containers and other rolling objects, simply and without physical effort for the people who use it, from one place to another.


  • Driver: DC motor 24V, 300W
  • Pullpower: 1,000 kg
  • Regulator: Speed and acceleration are freely programmable
  • Battery: Take Off 24 Volt, 18 Ah, Weight 14 kg
  • Charger: External
  • Tires: Massif round 250 x 80
  • Frame: Steel, Electro deposited and pulvercoated
  • Width: 440 mm
  • Length: 600 mm
  • Adze height: 750 - 1150 mm
  • Fold in height: 770 mm
  • Standard provided with: Battery indicator, Charger, CE-mark, Adjustable adze, Second Speed, Basis Module
  • Options: Second battery, Horn, Special Hooks, Remote Control

Egg Candler

LED egg candler for candling eggs while the incubation to determine if they are viable or not. "Viable" means that eggs are fertilized and embryos are able to develop and hatch. Available in 3 or 5 watts with low heat LED lighting. No UV/IR Light Radiation!


  • High Strength Light
  • Low Heat
  • High Reliability
  • Convenient & Efficient
  • Save Energy (80%)
  • Environment Friendly
  • 3 or 5 watt
  • Input voltage: 220 Volt, Light source: 1X3W High Power LED
  • Reflector efficiency: 90%, Source life: 50,000 hours
  • Color temperature: 3500K (Warm White)
Egg Candler / ME International

Egg Lifter

Egg Lifter ME International / reliable method to lift eggs

Peeco Egg Lift Systems provide the most reliable method in which to transfer eggs. The units are economically priced to meet the tightest of budgets. Increase your efficiency and reduce labor costs with a Peeco Egg Lift System. 

We offer a wide variety of standard egg lifter heads and pumps to accommodate nearly every application. If you are interested, please do not hesitate to contact us for more information.

Me International Installation GmbH
Winterweg 12
28832 Achim
Germany
+49 (0) 4202 -830 18
This email address is being protected from spambots. You need JavaScript enabled to view it.